- Product name: SNMG Inserts
- Series: Turning Inserts
- Chip-Breakers: AM/AR/BF/BM/BR/CM/DM
Beschreiwung
Product Information:
Turing insert SNMG. Double-Sided 90° square inserts. 0 degree relief angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid tool holding systems.Provides longer tool life than uncoated grades. Used on a wide range of materials and applications.
Specifications:
Application | Type | Ap (mm) | Fn (mm/rev) | Grade | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Semi Finishing | SNMG120404-AM | 1.00-5.00 | 0.12-0.40 | ● | O | ● | O | O | |||||||
SNMG120408-AM | 1.20-5.00 | 0.15-0.55 | ● | O | ● | O | O | ||||||||
SNMG120412-AM | 1.50-5.00 | 0.20-0.55 | ● | O | ● | O | O | ||||||||
SNMG150612-AM | 2.00-7.00 | 0.30-0.65 | ● | O | ● | O | O | ||||||||
● : Recommended Grade
O: Optional Grade
Application | Type | Ap (mm) | Fn (mm/rev) | Grade | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Rough Machining | SNMG120408-AR | 2.50-6.00 | 0.25-0.70 | ● | O | ||||||||||
SNMG120412-AR | 2.50-6.00 | 0.30-0.70 | ● | O | |||||||||||
SNMG120416-AR | 2.50-6.00 | 0.40-0.70 | ● | O | |||||||||||
SNMG150612-AR | 2.15-6.40 | 0.25-0.50 | ● | O | |||||||||||
SNMG190612-AR | 2.15-6.40 | 0.25-0.50 | ● | O | |||||||||||
SNMG190616-AR | 2.85-7.60 | 0.30-0.65 | ● | O | |||||||||||
● : Recommended Grade
O: Optional Grade
Application | Type | Ap (mm) | Fn (mm/rev) | Grade | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Finishing | SNMG120404-BF | 0.25-3.20 | 0.05-0.15 | ● | ● | O | O | ||||||||
SNMG120408-BF | 0.50-3.20 | 0.10-0.30 | ● | ● | O | O | |||||||||
SNMG120412-BF | 0.75-3.20 | 0.15-0.45 | ● | ● | O | O | |||||||||
● : Recommended Grade
O: Optional Grade
Application | Type | Ap (mm) | Fn (mm/rev) | Grade | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Semi Finishing | SNMG120404-BM | 0.30-4.20 | 0.08-0.25 | O | O | ● | O | O | |||||||
SNMG120408-BM | 0.65-4.20 | 0.15-0.45 | O | O | ● | O | O | ||||||||
SNMG120412-BM | 0.95-4.20 | 0.25-0.65 | O | O | ● | O | O | ||||||||
SNMG150608-BM | 0.65-5.20 | 0.15-0.45 | O | O | ● | O | O | ||||||||
SNMG150612-BM | 0.95-5.20 | 0.25-0.65 | O | O | ● | O | O | ||||||||
● : Recommended Grade
O: Optional Grade
Application | Type | Ap (mm) | Fn (mm/rev) | Grade | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1528 | WR1330 | ||||
M Rough Machining | SNMG120404-BR | 0.30-4.20 | 0.08-0.25 | O | O | O | ● | ● | O | ||||||
SNMG120408-BR | 0.65-4.20 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
SNMG120412-BR | 0.95-4.20 | 0.23-0.66 | O | O | O | ● | ● | O | |||||||
SNMG150608-BR | 0.65-5.20
| 0.15-0.44 | O | O | O | ● | ● | O | |||||||
SNMG150612-BR | 0.95-5.20 | 0.23-0.66 0.23-0.66 | O | O | O | ● | ● | O | |||||||
● : Recommended Grade
O: Optional Grade
Application | WD3040 | Ap (mm) | Fn (mm/rev) | Grade | |||
CVD | |||||||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Semi Finishing | SNMG120404-CM | 0.40-4.20 | 0.08-0.25 | ● | O | ||
SNMG120408-CM | 0.80-4.20 | 0.15-0.45 | ● | O | |||
SNMG120412-CM | 1.20-4.20 | 0.25-0.65 | ● | O | |||
● : Recommended Grade
O: Optional Grade
Application | Type | Ap (mm) | Fn (mm/rev) | Grade | ||||||||||||
CVD | PVD | |||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1520 | WR1525 | WR1028 | WR1030 | ||||
S Semi Finishing | SNMG120404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | ● | ● | O | O | ||||||
SNMG120408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
SNMG120412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
SNMG120416-DM | 1.80-3.90 | 0.30-0.90 | O | O | O | ● | ● | O | O | |||||||
SNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
SNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
SNMG150616-DM | 1.80-3.90 | 0.30-0.90 | O | O | O | ● | ● | O | O | |||||||
● : Recommended Grade
O: Optional Grade
Application:
Application for turning and milling carbon and alloy steels, tools steel and stainless steel.
FAQ:
How to choose correct turning insert?
Select insert geometry based on selected operation, for example finishing.
Select the largest possible nose angle on the insert for strength and economy.
Select the insert size depending on the depth of cut
Select the largest possible nose radius for insert strength.
What is the difference between face milling and End Milling?
These are two of the most prevalent milling operations, each using different types of cutters – the and mill and the face mill. The difference between End Milling and face milling is that an End Mill uses both the end and the sides of the cutter, whereas face milling is used for horizontal cutting.
Hot Tags: snmg inserts, turning, milling, cutting, grooving, factory, CNC, snmg12, snmg 120408
