- Produit Numm: CNMG Inserts
- Serie: CNMG
- Chip-Breakers: AM/AR/BF/BM/BR/CM/DM
Beschreiwung
Produkt Informatioun:
CNMG Doppelsäiteg 80° rhombesch drehen Inserts. Et kann mat multiple Operatiounen ëmgoen andeems Dir verschidde Chipbriecher a Graden kombinéiert. CNMG 80° Turning Inserts huet eng fortgeschratt Beschichtung iwwer e ganz deformasjonsbeständeg onlegéiert Carbide Substrat. Dëst bréngt effizient Veraarbechtung an héich Stabilitéit. Universal héich Produktivitéit Grad fir Dréi. Gutt Gläichgewiicht vun Produktivitéit an Zouverlässegkeet. Et ass eng ideal Wiel fir roughing, fäerdeg an allgemeng machining.
Spezifikatioune:
Applikatioun | Typ | Ap (mm) | Fn (mm/v) | Grad | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4225 | WD 4225 | WD 4325 | WD 4235 | WD 4335 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | ||||
P Semi Finishing | CNMG120404-AM | 0.60-6.40 | 0.10-0.30 | ● | O | ● | O | O | |||||||
CNMG120408-AM | 1.20-6.40 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
CNMG120412-AM | 1.80-6.40 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
CNMG120416-AM | 2.40-6.40 | 0.12-0.40 | ● | O | ● | O | O | ||||||||
CNMG160608-AM | 1.20-8.10 | 0.10-0.30 | ● | O | ● | O | O | ||||||||
CNMG160612-AM | 1.80-8.10 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
CNMG160616-AM | 2.40-8.10 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
CNMG190608-AM | 1.20-9.70 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
CNMG190612-AM | 1.80-9.70 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
CNMG190616-AM | 2.40-9.70 | 0.40-1.20 | ● | O | ● | O | O | ||||||||
●: Recommandéiert Grad
O: Optional Grad
Applikatioun | Typ | Ap (mm) | Fn (mm/v) | Grad | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 4235 | WD 4335 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | ||||
P Rau Machining | CNMG120408-AR | 1.45-5.20 | 0.15-0.32 | ● | O | ||||||||||
CNMG120412-AR | 2.15-5.20 | 0.25-0.50 | ● | O | |||||||||||
CNMG120416-AR | 2.90-5.20 | 0.30-0.65 | ● | O | |||||||||||
CNMG160608-AR | 1.45-6.40 | 0.15-6.35 | ● | O | |||||||||||
CNMG160612-AR | 2.15-6.40 | 0.24-0.50 | ● | O | |||||||||||
CNMG160616-AR | 2.90-6.40 | 0.30-0.65 | ● | O | |||||||||||
CNMG190608-AR | 1.45-7.70 | 0.15-0.35 | ● | O | |||||||||||
CNMG190612-AR | 2.15-7.70 | 0.25-0.50 | ● | O | |||||||||||
CNMG190616-AR | 2.90-7.70 | 0.30-0.65 | ● | O | |||||||||||
CNMG190624-AR | 4.30-7.70 | 0.45-0.95 | ● | O | |||||||||||
●: Recommandéiert Grad
O: Optional Grad
Applikatioun | Typ | Ap (mm) | Fn (mm/v) | Grad | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Ofschloss | CNMG090304-BF | 0.25-2.40 | 0.05-0.15 | ● | ● | O | O | O | |||||||
CNMG090308-BF | 0.50-2.40 | 0.10-0.30 | ● | ● | O | O | O | ||||||||
CNMG120404-BF | 0.25-3.20 | 0.05-0.15 | ● | ● | O | O | O | ||||||||
CNMG120408-BF | 0.50-3.20 | 0.10-0.30 | ● | ● | O | O | O | ||||||||
CNMG120412-BF | 0.75-3.20 | 0.15-0.45 | ● | ● | O | O | O | ||||||||
●: Recommandéiert Grad
O: Optional Grad
Applikatioun | Typ | Ap (mm) | Fn (mm/v) | Grad | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Semi Finishing | CNMG120404-BM | 0.30-4.30 | 0.08-0.25 | O | O | ● | O | O | |||||||
CNMG120408-BM | 0.65-4.30 | 0.15-0.45 | O | O | ● | O | O | ||||||||
CNMG120412-BM | 0.95-4.30 | 0.20-0.65 | O | O | ● | O | O | ||||||||
CNMG160608-BM | 0.65-5.30 | 0.15-0.45 | O | O | ● | O | O | ||||||||
CNMG160612-BM | 0.95-5.30 | 0.25-0.65 | O | O | ● | O | O | ||||||||
CNMG160616-BM | 1.30-5.30 | 0.30-0.90 | O | O | ● | O | O | ||||||||
●: Recommandéiert Grad
O: Optional Grad
Applikatioun | Typ | Ap (mm) | Fn (mm/v) | Grad | |||
CVD | |||||||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Semi Ofschloss | CNMG120404-CM | 0.40-4.30 | 0.08-0.25 | ● | |||
CNMG120408-CM | 0.80-4.30 | 0.15-0.45 | ● | ||||
CNMG120412-CM | 1.20-4.30 | 0.20-0.65 | ● | ||||
CNMG160612-CM | 1.20-5.30 | 0.25-0.65 | ● | ||||
CNMG160616-CM | 1.60-5.30 | 0.30-0.90 | ● | ||||
CNMG190612-CM | 1.20-6.40 | 0.25-0.65 | ● | ||||
●: Recommandéiert Grad
O: Optional Grad
Applikatioun | Typ | Ap (mm) | Fn (mm/v) | Grad | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1528 | WR 1330 | ||||
M Rau Machining | CNMG120404-BR | 0.30-4.30 | 0.08-0.25 | O | O | O | ● | ● | O | ||||||
CNMG120408-BR | 0.65-4.30 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
CNMG120412-BR | 0.95-4.30 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
CNMG160608-BR | 0.65-5.30 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
CNMG160612-BR | 0.95-5.30 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
CNMG160616-BR | 1.25-5.30 | 0.30-0.90 | O | O | O | ● | ● | O | |||||||
●: Recommandéiert Grad
O: Optional Grad
Applikatioun | Typ | Ap (mm) | Fn (mm/v) | Grad | ||||||||||||
CVD | PVD | |||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1520 | WR 1525 | WR 1028 | WR 1030 | ||||
S Semi Finishing | CNMG120404-DM | 0.40-4.30 | 0.08-0.25 | O | O | O | ● | O | ● | O | ||||||
CNMG120408-DM | 0.80-4.30 | 0.15-0.45 | O | O | O | ● | O | ● | O | |||||||
CNMG120412-DM | 1.20-4.30 | 0.25-0.65 | O | O | O | ● | O | ● | O | |||||||
CNMG120416-DM | 1.60-4.30 | 0.30-0.90 | O | O | O | ● | O | ● | O | |||||||
●: Recommandéiert Grad
O: Optional Grad
Applikatioun:
Engagéiert Graden a Geometrie fir all Uwendungen a Materialien. CNMG 80° Turning Inserts ass eng ideal Wiel fir rau, semi-Finishing a Finishing Machining vun de meeschte Stol, Edelstahl, Goss, Net-ferro Materialien, a Superlegierungen ënner stabile Konditiounen. Et mécht och gutt machining gehärt a kuerz Chipping Materialien.
FAQ:
Wat sinn Är Haaptprodukter?
D'Haaptprodukt vun der WeDo Schneid Tools Firma dréit Insert. milling asetzen. Bueraarbechten Insert. threading Inserts. grooving inserts an aluminium machining inserts.
Aus wat sinn Inserts gemaach?
Bal all d'Inserts besteet aus Zementkarbid, wat aus enger Kombinatioun vu Wolframkarbid (WC) a Kobalt (Co) resultéiert. Déi haart Partikel am Insert sinn WC, wärend Co kann als de Klebstoff geduecht ginn, deen den Insert zesumme hält.
Wat ass CNMG Insert?
Dëse CNMG Insert ass gëeegent fir Héichgeschwindegkeetkontinuéierlech Schnëttting. Ganz haltbar a mat superior Finish.good choix for CNC turning inserts.
Hot Tags: ccmt Inserts, Dréien, Fräsen, Ausschneiden, Groove, Fabréck, CNC, cnmg, cnmg 12 04 08, cnmg 432, cnmg 120404, cnmg 12
Wedo CuttingTools Co.,Ltdass bekannt als ee vun de féierendeCarbid InsertsFournisseuren a China.D'Haaptrei Produkter vun der Firma sinndréinen Inserts,Milling inserts,Bueraarbechten, threading inserts, grooving inserts anEnn Mill.
