- Ainm toraidh: cuir a-steach TNMG
- Sreath: TNMG
- Luchd-brisidh chip: AM/AR/BF/BM/CM/BR
Feuch an cuir thu a-steach na prìomh fhaclan!
Fiosrachadh toraidh:
TTha NMG Insert ann an cumadh triantan le toll,ceàrnan àicheil,dà-thaobh.Airson raon farsaing de stuthan agus machining suidheachaidhean,gus dèanamh cinnteach à innealachadh èifeachdach agus àrd seasmhachdairson leth-gharbh agus garbh.
Sshònrachadhs:
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 4235 | WD 4335 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | ||||
P Semi Crìochnachadh | TNMG160404-AM | 0.60-5.80 | 0.10-0.30 | ● | O | ● | O | O | |||||||
TNMG160408-AM | 1.20-5.80 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
TNMG160412-AM | 1.80-5.80 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
TNMG220408-AM | 1.20-7.70 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
TNMG220412-AM | 1.80-7.70 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
TNMG220416-AM | 2.40-7.70 | 0.40-1.20 | ● | O | ● | O | O | ||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 4235 | WD 4335 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | ||||
P Rough Machining | TNMG160408-AR | 2.00-5.00 | 0.25-0.65 | ● | O | ||||||||||
TNMG220408-AR | 2.50-7.00 | 0.25-0.65 | ● | O | |||||||||||
TNMG220412-AR | 2.50-7.00 | 0.25-0.65 | ● | O | |||||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Crìochnaich | TNMG160404-BF | 0.25-3.10 | 0.05-0.15 | ● | ● | O | O | ||||||||
TNMG160408-BF | 0.50-3.10 | 0.10-0.30 | ● | ● | O | O | |||||||||
TNMG160412-BF | 0.75-3.10 | 0.10-0.30 | ● | ● | O | O | |||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Semi-chrìochnachadh | TNMG160404-BM | 0.30-4.10 | 0.08-0.25 | O | O | ● | O | O | |||||||
TNMG160408-BM | 0.65-4.10 | 0.15-0.45 | O | O | ● | O | O | ||||||||
TNMG160412-BM | 0.95-4.10 | 0.25-0.65 | O | O | ● | O | O | ||||||||
TNMG220408-BM | 0.65-4.90 | 0.15-0.45 | O | O | ● | O | O | ||||||||
TNMG220412-BM | 0.95-4.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | CVD | |||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Semi Crìochnachadh | TNMG160404-CM | 0.40-4.10 | 0.08-0.25 | ● | O | ||
TNMG160408-CM | 0.80-4.10 | 0.15-0.45 | ● | O | |||
TNMG160412-CM | 1.20-4.10 | 0.25-0.65 | ● | O | |||
TNMG220412-CM | 1.20-4.90 | 0.25-0.65 | ● | O | |||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Machining garbh | TNMG160404-BR | 0.30-4.10 | 0.08-0.25 | O | O | ● | O | O | |||||||
TNMG160408-BR | 0.65-4.10 | 0.15-0.45 | O | O | ● | O | O | ||||||||
TNMG160412-BR | 0.95-4.10 | 0.25-0.65 | O | O | ● | O | O | ||||||||
TNMG220408-BR | 0.65-4.90 | 0.15-0.45 | O | O | ● | O | O | ||||||||
TNMG220412-BR | 0.95-4.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas:
Tha an TNMG Insert air a chleachdadh sa mhòr-chuid ann an raointean tionndadh meatailt, bleith, gearradh agus grooving, tionndadh snàithlean, msaa Iarrtas airson stuth stàilinn.
Ceistean Cumanta:
Dè a th’ ann an cuir a-steach TNMG?
Is e cuir a-steach TNMG cuir a-steach tionndadh ISO agus mar as trice air a chleachdadh ann an cha mhòr a h-uile inneal CNC. Tha e air a chleachdadh airson tagraidhean Tionndadh Pròifil agus tagraidhean tionndaidh shailean coitcheann. Tha 6 oirean gearraidh aig Insert.
Dè an diofar eadar bleith aghaidh agus muilne deiridh?
Is iad seo na h-obraichean muilleidh as cumanta, a’ cleachdadh diofar sheòrsaichean de luchd-gearraidh - am muileann deiridh agus am muileann aghaidh. Is e an eadar-dhealachadh eadar bleith deiridh agus bleith aghaidh gu bheil muileann crìochnachaidh a’ cleachdadh gach cuid ceann agus taobhan a’ ghearradair, ach thathas a’ cleachdadh bleith aghaidh airson gearradh còmhnard.
Hot Tags: cuir a-steach tnmg,tionndadh, bleith, buain, grooving, factaraidh,CNC, TNMG160404, TNMG 1604, TNMG 16, TNMG 22 04 08, TNMG 160408
