- Ainm toraidh: CNMG Inserts
- Sreath: CNMG
- Luchd-brisidh chip: AM/AR/BF/BM/BR/CM/DM
Feuch an cuir thu a-steach na prìomh fhaclan!
Fiosrachadh toraidh:
Tionndadh rhombic 80 ° le dà thaobh CNMG a-steach. Faodaidh e dèiligeadh ri ioma-obair le bhith a’ cothlamadh diofar luchd-brisidh chip agus ìrean. Tha CNMG 80 ° Turning Inserts a’ nochdadh còmhdach adhartach thairis air substrate carbide gun chomas deformation. Bheir seo innealachadh èifeachdach agus àrd seasmhachd. Ìre cinneasachd àrd uile-choitcheann airson tionndadh. Deagh chothromachadh cinneasachd agus earbsachd. Tha e na dheagh roghainn airson garbh, crìochnachadh agus innealachadh coitcheann.
Sònrachaidhean:
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4225 | WD 4225 | WD 4325 | WD 4235 | WD 4335 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | ||||
P Semi-chrìochnachadh | CNMG120404-AM | 0.60-6.40 | 0.10-0.30 | ● | O | ● | O | O | |||||||
CNMG120408-AM | 1.20-6.40 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
CNMG120412-AM | 1.80-6.40 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
CNMG120416-AM | 2.40-6.40 | 0.12-0.40 | ● | O | ● | O | O | ||||||||
CNMG160608-AM | 1.20-8.10 | 0.10-0.30 | ● | O | ● | O | O | ||||||||
CNMG160612-AM | 1.80-8.10 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
CNMG160616-AM | 2.40-8.10 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
CNMG190608-AM | 1.20-9.70 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
CNMG190612-AM | 1.80-9.70 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
CNMG190616-AM | 2.40-9.70 | 0.40-1.20 | ● | O | ● | O | O | ||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 4235 | WD 4335 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | ||||
P Machining garbh | CNMG120408-AR | 1.45-5.20 | 0.15-0.32 | ● | O | ||||||||||
CNMG120412-AR | 2.15-5.20 | 0.25-0.50 | ● | O | |||||||||||
CNMG120416-AR | 2.90-5.20 | 0.30-0.65 | ● | O | |||||||||||
CNMG160608-AR | 1.45-6.40 | 0.15-6.35 | ● | O | |||||||||||
CNMG160612-AR | 2.15-6.40 | 0.24-0.50 | ● | O | |||||||||||
CNMG160616-AR | 2.90-6.40 | 0.30-0.65 | ● | O | |||||||||||
CNMG190608-AR | 1.45-7.70 | 0.15-0.35 | ● | O | |||||||||||
CNMG190612-AR | 2.15-7.70 | 0.25-0.50 | ● | O | |||||||||||
CNMG190616-AR | 2.90-7.70 | 0.30-0.65 | ● | O | |||||||||||
CNMG190624-AR | 4.30-7.70 | 0.45-0.95 | ● | O | |||||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Crìochnaich | CNMG090304-BF | 0.25-2.40 | 0.05-0.15 | ● | ● | O | O | O | |||||||
CNMG090308-BF | 0.50-2.40 | 0.10-0.30 | ● | ● | O | O | O | ||||||||
CNMG120404-BF | 0.25-3.20 | 0.05-0.15 | ● | ● | O | O | O | ||||||||
CNMG120408-BF | 0.50-3.20 | 0.10-0.30 | ● | ● | O | O | O | ||||||||
CNMG120412-BF | 0.75-3.20 | 0.15-0.45 | ● | ● | O | O | O | ||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Semi-chrìochnachadh | CNMG120404-BM | 0.30-4.30 | 0.08-0.25 | O | O | ● | O | O | |||||||
CNMG120408-BM | 0.65-4.30 | 0.15-0.45 | O | O | ● | O | O | ||||||||
CNMG120412-BM | 0.95-4.30 | 0.20-0.65 | O | O | ● | O | O | ||||||||
CNMG160608-BM | 0.65-5.30 | 0.15-0.45 | O | O | ● | O | O | ||||||||
CNMG160612-BM | 0.95-5.30 | 0.25-0.65 | O | O | ● | O | O | ||||||||
CNMG160616-BM | 1.30-5.30 | 0.30-0.90 | O | O | ● | O | O | ||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||
CVD | |||||||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Semi Crìochnachadh | CNMG120404-CM | 0.40-4.30 | 0.08-0.25 | ● | |||
CNMG120408-CM | 0.80-4.30 | 0.15-0.45 | ● | ||||
CNMG120412-CM | 1.20-4.30 | 0.20-0.65 | ● | ||||
CNMG160612-CM | 1.20-5.30 | 0.25-0.65 | ● | ||||
CNMG160616-CM | 1.60-5.30 | 0.30-0.90 | ● | ||||
CNMG190612-CM | 1.20-6.40 | 0.25-0.65 | ● | ||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1528 | WR 1330 | ||||
M Machining garbh | CNMG120404-BR | 0.30-4.30 | 0.08-0.25 | O | O | O | ● | ● | O | ||||||
CNMG120408-BR | 0.65-4.30 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
CNMG120412-BR | 0.95-4.30 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
CNMG160608-BR | 0.65-5.30 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
CNMG160612-BR | 0.95-5.30 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
CNMG160616-BR | 1.25-5.30 | 0.30-0.90 | O | O | O | ● | ● | O | |||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | ||||||||||||
CVD | PVD | |||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1520 | WR 1525 | WR 1028 | WR 1030 | ||||
S Semi-chrìochnachadh | CNMG120404-DM | 0.40-4.30 | 0.08-0.25 | O | O | O | ● | O | ● | O | ||||||
CNMG120408-DM | 0.80-4.30 | 0.15-0.45 | O | O | O | ● | O | ● | O | |||||||
CNMG120412-DM | 1.20-4.30 | 0.25-0.65 | O | O | O | ● | O | ● | O | |||||||
CNMG120416-DM | 1.60-4.30 | 0.30-0.90 | O | O | O | ● | O | ● | O | |||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas:
Ìrean sònraichte agus geoimeatraidh airson a h-uile tagradh agus stuth. Tha CNMG 80 ° Turning Inserts na dheagh roghainn airson innealachadh garbh, leth-chrìochnaichte agus crìochnachaidh den mhòr-chuid de steels, steels gun staoin, iarann teilgte, stuthan neo-iarannach, agus super alloys fo chumhachan seasmhach. Bidh e cuideachd a’ coileanadh gu math innealachadh stuthan cruaidh agus sgoltadh goirid.
Ceistean Cumanta:
Dè na prìomh thoraidhean a th’ agad?
Tha prìomh thoraidhean companaidh innealan gearraidh WeDo a’ tionndadh cuir a-steach. cuir a-steach muilleadaireachd. cuir a-steach drileadh. cuir a-steach snàithlean. cuir a-steach grooving agus cuir a-steach innealachadh alùmanum.
Cò às a tha cuir a-steach air a dhèanamh?
Tha cha mhòr a h-uile cuir a-steach a’ toirt a-steach carbide saimeant, a tha mar thoradh air measgachadh de tungsten carbide (WC) agus cobalt (Co). Is e WC na mìrean cruaidh taobh a-staigh an cuir a-steach, agus faodar smaoineachadh air Co mar an glaodh a chumas an cuir a-steach còmhla.
Dè a th’ ann an cuir a-steach CNMG?
Tha an CNMG Insert seo freagarrach airson astar àrdgearradh leantainneachting. Gu math seasmhach agus le crìochnachadh nas fheàrr.good roghainn airson cuir a-steach tionndadh CNC.
Hot Tags: cuir a-steach ccmt, tionndadh, bleith, gearradh, grooving, factaraidh, CNC, cnmg, cnmg 12 04 08, cnmg 432, cnmg 120404, cnmg 12
Wedo CuttingTools Co,.Ltdtha e ainmeil mar aon de na prìomhcuir a-steach carbidesolaraichean ann an Sìona.Tha prìomh thoraidhean na companaidhcuir a-steach tionndadh,Cuir a-steach muilneadh,Cuir a-steach drileadh, cuir a-steach snàithlean, cuir a-steach grooving agusmuileann-deiridh.
