- inoa huahana: PVD Coated Inserts
- Moʻolelo: HNMG
- ʻO nā mea ʻokiʻoki: R / M
wehewehe
ʻIkepili Huahana:
Uku-kumu me ke Kaʻina Paʻa Paʻa ʻO Tungsten carbide Milling inserts HNMG. alo milling insert.it mea pālua ʻaoʻao 12-ʻaoʻao hoʻokele waiwai maka milling cutter me kona wiper blade a me ka ʻoki ʻoki ʻana i kekahi ikaika me ka PVD Coating, e hāʻawi ana i ka lole maikaʻi loa a me ke kūpaʻa oxidation, maikaʻi chipping resistance.Dimensionally pololei, lōʻihi a hilinaʻi hana. .
Nā kikoʻī:
ʻAno | Ap (mm) | Fn (mm/rev) | CVD | PVD | |||||||||
WD3020 | WD3040 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1520 | WR1525 | WR1028 | WR1330 | |||
HNMG0907ANSN-R | 1.50-4.00 | 0.20-0.70 | • | • | O | O | |||||||
HNMG0907ANSN-M | 1.00-3.00 | 0.05-0.15 | • | • | O | O | |||||||
• : Papa Manao
O: Papa koho
Noi:
Hiki i kēia ʻano mea hoʻokomo ke loaʻa kahi hoʻopau ʻili maikaʻi, hoʻokele waiwai kiʻekiʻe, kūpono no ka mīkini mea kila, ke kila kila, ka hao a me nā alloys super.
FAQ:
He aha ka mea ʻoki ʻoki?
ʻO ka puʻupuʻu chip he poʻohiwi i loko o ka mīkini mea hana. ua hana ʻia ia ma ka wili ʻana i kahi ʻāpana like. i luna.
He aha nā carbide i uhi ʻia?
ʻO ka carbide i hoʻopaʻa ʻia i uhi ʻia, ʻo ia hoʻi ka carbide sima me kahi uhi. Loaʻa iā ia ka uhi PVD a me CVD. ʻO ka carbide i uhi ʻia me ka ikaika paʻa kiʻekiʻe a me ke kūpaʻa ʻana i ka lole.
