- Product name: SNMX12 Inserts
- Series: SNMX12
- Chip-Breakers: GM
વર્ણન
Product Information:
Face mills are tools with a large diameter that are used to cut a wide shallow path for facing operations. with PVD coating is resistant to deformation, good wear resistance and collapse resistance, low co-efficient of friction.
SNMX insert with double-sided negative rake 8-sided shape is highly cost-effective. Double front angle design makes good sharpness and a certain strength.
Specifications:
Type | Ap (mm) | Fn (mm/rev) | CVD | PVD | |||||||||
WD 3020 | WD 3040 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1520 | WR 1525 | WR 1028 | WR 1330 | |||
SNMX1205ANN-GM | 1.00-6.00 | 0.15-0.50 | ● | ● | O | O | |||||||
SNMX1606ANN-GM | 1.00-6.00 | 0.15-0.50 | ● | ● | O | O | |||||||
● : Recommended Grade
O: Optional Grade
Application:
Facing is used for machining a large flat area, typically the top of the part in preparation for other milling operations.
SNMX insert with its own wiper edge has a high surface finishing with multiple type of chip breakers. It is suitable for general machining of steel and stainless steel.cast iron.super alloys.
FAQ:
What milling method is generally recommended?
Down milling is generally recommended. With the down milling method, the burnishing effect can be avoided, resulting in less heat & minimal work-hardening tendency.
How is milling done?
The milling process is removing the materials by performing many separate and small cuts. It is accomplished by using a cutter with many teeth, spinning the cutter at a high speed, or advancing the material through the cutter slowly.
Hot Tags: snmx insert, turning, milling, cutting, grooving, factory, CNC
