- Ainm an táirge: Ionsáigh SNMG
- Sraith: SNMG
- Scoradáin: AM/AR/BF/BM/BR/CM/DM
tuairisc
Eolas Táirge:
Turing cuir isteach SNMG. Ionsáigh dhá thaobh 90° cearnach. uillinn faoisimh 0 céim. Cuireann uirlisí chomhdhúile soladacha saolré fada uirlisí ar fáil agus luasanna gearrtha níos tapúla ná foshraitheanna eile, ach tá siad níos sobhriste agus ní mór iad a úsáid le córais dochta sealbhaithe uirlisí. Soláthraíonn sé saol uirlisí níos faide ná gráid neamhbhrataithe. Úsáidtear é ar raon leathan ábhar agus feidhmchlár.
Sonraíochtaí:
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Leathchríochnú | SNMG120404-AM | 1.00-5.00 | 0.12-0.40 | ● | O | ● | O | O | |||||||
SNMG120408-AM | 1.20-5.00 | 0.15-0.55 | ● | O | ● | O | O | ||||||||
SNMG120412-AM | 1.50-5.00 | 0.20-0.55 | ● | O | ● | O | O | ||||||||
SNMG150612-AM | 2.00-7.00 | 0.30-0.65 | ● | O | ● | O | O | ||||||||
●: Grád Molta
O: Grád Roghnach
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Meaisínithe Garbh | SNMG120408-AR | 2.50-6.00 | 0.25-0.70 | ● | O | ||||||||||
SNMG120412-AR | 2.50-6.00 | 0.30-0.70 | ● | O | |||||||||||
SNMG120416-AR | 2.50-6.00 | 0.40-0.70 | ● | O | |||||||||||
SNMG150612-AR | 2.15-6.40 | 0.25-0.50 | ● | O | |||||||||||
SNMG190612-AR | 2.15-6.40 | 0.25-0.50 | ● | O | |||||||||||
SNMG190616-AR | 2.85-7.60 | 0.30-0.65 | ● | O | |||||||||||
●: Grád Molta
O: Grád Roghnach
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Ag críochnú | SNMG120404-BF | 0.25-3.20 | 0.05-0.15 | ● | ● | O | O | ||||||||
SNMG120408-BF | 0.50-3.20 | 0.10-0.30 | ● | ● | O | O | |||||||||
SNMG120412-BF | 0.75-3.20 | 0.15-0.45 | ● | ● | O | O | |||||||||
●: Grád Molta
O: Grád Roghnach
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Leathchríochnú | SNMG120404-BM | 0.30-4.20 | 0.08-0.25 | O | O | ● | O | O | |||||||
SNMG120408-BM | 0.65-4.20 | 0.15-0.45 | O | O | ● | O | O | ||||||||
SNMG120412-BM | 0.95-4.20 | 0.25-0.65 | O | O | ● | O | O | ||||||||
SNMG150608-BM | 0.65-5.20 | 0.15-0.45 | O | O | ● | O | O | ||||||||
SNMG150612-BM | 0.95-5.20 | 0.25-0.65 | O | O | ● | O | O | ||||||||
●: Grád Molta
O: Grád Roghnach
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1528 | WR1330 | ||||
M Meaisínithe Garbh | SNMG120404-BR | 0.30-4.20 | 0.08-0.25 | O | O | O | ● | ● | O | ||||||
SNMG120408-BR | 0.65-4.20 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
SNMG120412-BR | 0.95-4.20 | 0.23-0.66 | O | O | O | ● | ● | O | |||||||
SNMG150608-BR | 0.65-5.20
| 0.15-0.44 | O | O | O | ● | ● | O | |||||||
SNMG150612-BR | 0.95-5.20 | 0.23-0.66 0.23-0.66 | O | O | O | ● | ● | O | |||||||
●: Grád Molta
O: Grád Roghnach
Iarratas | WD3040 | Ap (mm) | Fn (mm/rev) | Grád | |||
CVD | |||||||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Leathchríochnú | SNMG120404-CM | 0.40-4.20 | 0.08-0.25 | ● | O | ||
SNMG120408-CM | 0.80-4.20 | 0.15-0.45 | ● | O | |||
SNMG120412-CM | 1.20-4.20 | 0.25-0.65 | ● | O | |||
●: Grád Molta
O: Grád Roghnach
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | ||||||||||||
CVD | PVD | |||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1520 | WR1525 | WR1028 | WR1030 | ||||
S Leathchríochnú | SNMG120404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | ● | ● | O | O | ||||||
SNMG120408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
SNMG120412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
SNMG120416-DM | 1.80-3.90 | 0.30-0.90 | O | O | O | ● | ● | O | O | |||||||
SNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
SNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
SNMG150616-DM | 1.80-3.90 | 0.30-0.90 | O | O | O | ● | ● | O | O | |||||||
●: Grád Molta
O: Grád Roghnach
Feidhmchlár:
Iarratas ar steels carbóin agus cóimhiotail, cruach uirlisí agus cruach dhosmálta a chasadh agus a mhuilleoireacht.
CC:
Conas cuir isteach casadh ceart a roghnú?
Roghnaigh cuir isteach geoiméadracht bunaithe ar oibríocht roghnaithe, mar shampla críochnú.
Roghnaigh an uillinn srón is mó is féidir ar an iontán le haghaidh neart agus barainneacht.
Roghnaigh an méid cuir isteach ag brath ar an doimhneacht gearrtha
Roghnaigh an ga srón is mó is féidir le haghaidh neart ionsáite.
Cad é an difríocht idir muilleoireacht aghaidh agus muilleoireacht deiridh?
Is iad seo an dá cheann de na hoibríochtaí muilleoireachta is forleithne, gach ceann ag baint úsáide as cineálacha éagsúla gearrthóirí - an muileann agus an muileann aghaidhe. Is é an difríocht idir muilleoireacht deiridh agus muilleoireacht aghaidh ná go n-úsáideann muileann deiridh deireadh agus taobhanna an ghearrthóra, ach úsáidtear muilleoireacht aghaidh le haghaidh gearradh cothrománach.
Hot Tags: Ionsáigh snmg, ag casadh,muilleoireacht, gearradh, grooving, monarcha,CNC
