- Ionsáigh DNMG
- Sraith: DNMG
- Scoradáin: AM/AR/AS/BF/BM/BR/CM/DM/SM/TM
tuairisc
Eolas Táirge:
Tá cuir isteach DNMG dhá thaobh 55 ° rombic, uillinn imréiteach 0 °. le tsubstráit optamaithe agus teaglaim sciath, tá an fheidhmíocht is fearr ag DNMG. Is féidir céimseata cuir isteach a optamú le haghaidh feidhmchlár meaisínithe. Soláthraíonn grád agus céimseata iontaofacht ard. Cinntíonn braite caitheamh den scoth go n-úsáidtear na himill go léir. Le raon de mhéideanna éagsúla, déanaimid éasca an t-iontán casadh idéalach a roghnú le haghaidh d'iarratais phleanáilte.
Sonraíochtaí:
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Leathchríochnú | DNMG150404-AM | 0.60-5.40 | 0.10-0.30 | ● | O | ● | O | O | |||||||
DNMG150408-AM | 1.20-5.40 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
DNMG150412-AM | 1.80-5.40 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
DNMG150604-AM | 0.60-5.40 | 0.10-0.30 | ● | O | ● | O | O | ||||||||
DNMG150608-AM | 1.20-5.40 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
DNMG150612-AM | 1.80-5.40 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
●: Grád Molta
O: Grád Roghnach
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Meaisínithe Garbh | DNMG150408-AR | 0.80-4.0 | 0.15-0.50 | ● | O | ||||||||||
DNMG150412-AR | 1.20-4.0 | 0.15-0.65 | ● | O | |||||||||||
DNMG150608-AR | 0.80-4.0 | 0.15-0.50 | ● | O | |||||||||||
DNMG150612-AR | 1.20-4.0 | 0.15-0.65 | ● | O | |||||||||||
●: Grád Molta
O: Grád Roghnach
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Ag críochnú | DNMG150404-BF | 0.25-2.90 | 0.05-0.15 | ● | ● | O | O | ||||||||
DNMG150408-BF | 0.50-2.90 | 0.10-0.30 | ● | ● | O | O | |||||||||
DNMG150412-BF | 0.75-2.90 | 0.15-0.45 | ● | ● | O | O | |||||||||
DNMG150604-BF | 0.25-2.90 | 0.05-0.15 | ● | ● | O | O | |||||||||
DNMG150608-BF | 0.50-2.90 | 0.10-0.30 | ● | ● | O | O | |||||||||
DNMG150612-BF | 0.75-2.90 | 0.15-0.45 | ● | ● | O | O | |||||||||
●: Grád Molta
O: Grád Roghnach
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Leathchríochnú | DNMG150404-BM | 0.30-3.90 | 0.08-0.25 | O | O | ● | O | O | |||||||
DNMG150408-BM | 0.65-3.90 | 0.15-0.45 | O | O | ● | O | O | ||||||||
DNMG150412-BM | 0.95-3.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
DNMG150604-BM | 0.30-3.90 | 0.08-0.20 | O | O | ● | O | O | ||||||||
DNMG150608-BM | 0.65-3.90 | 0.15-0.45 | O | O | O | O | |||||||||
DNMG150612-BM | 0.95-3.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
●: Grád Molta
O: Grád Roghnach
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1528 | WR1330 | ||||
M Meaisínithe Garbh | DNMG150404-BR | 0.30-3.90 | 0.08-0.25 | O | O | O | ● | ● | O | ||||||
DNMG150408-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
DNMG150412-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
DNMG150604-BR | 0.30-3.90 | 0.08-0.20 | O | O | O | ● | ● | O | |||||||
DNMG150608-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
DNMG150612-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
●: Grád Molta
O: Grád Roghnach
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | CVD | |||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Leathchríochnú | DNMG150404-CM | 0.40-3.90 | 0.08-0.25 | ● | O | ||
DNMG150408-CM | 0.80-3.90 | 0.15-0.45 | ● | O | |||
DNMG150412-CM | 1.20-3.90 | 0.25-0.65 | ● | O | |||
DNMG150604-CM | 0.40-3.90 | 0.08-0.20 | ● | O | |||
DNMG150608-CM | 0.80-3.90 | 0.15-0.45 | ● | O | |||
DNMG150612-CM | 1.20-3.90 | 0.25-0.65 | ● | O | |||
●: Grád Molta
O: Grád Roghnach
Iarratas | Cineál | Ap (mm) | Fn (mm/rev) | Grád | ||||||||||||
CVD | PVD | |||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1520 | WR1525 | WR1028 | WR1030 | ||||
S Leathchríochnú | DNMG150404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | ● | ● | O | O | ||||||
DNMG150408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
DNMG150412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
DNMG150604-DM | 0.40-3.90 | 0.08-0.20 | O | O | O | ● | ● | O | O | |||||||
DNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
DNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
●: Grád Molta
O: Grád Roghnach
Iarratas:
Uirlis gearrtha DNMG a úsáidtear le haghaidh grooving, próifíliú, críochnú, agus feidhmeanna meaisínithe eile.
Is é DNMG an chéad rogha maidir le píosaí oibre caol a chasadh go seachtrach , atá oiriúnach le haghaidh críochnú meánach agus críochnúgach cineál cruach.
CC:
Conas cuir isteach casadh ceart a roghnú?
Roghnaigh cuir isteach céimseata bunaithe ar oibriú, mar shampla críochnú.Roghnaigh an méid cuir isteach ag brath ar an doimhneacht gearrtha.
Roghnaigh an uillinn srón is mó is féidir le haghaidh neart agus barainneacht,an ga srón is mó is féidir le haghaidh neart isteach.
Cad é an difríocht idir muilleoireacht aghaidh agus muilleoireacht deiridh?
Is iad seo na hoibríochtaí muilleoireachta is coitianta, ag baint úsáide as cineálacha éagsúla gearrthóirí - an muileann deiridh agus an muileann aghaidhe. Is é an difríocht idir muilleoireacht deiridh agus muilleoireacht aghaidh ná go n-úsáideann muileann deiridh deireadh agus taobhanna an ghearrthóra, ach úsáidtear muilleoireacht aghaidh le haghaidh gearradh cothrománach.
Hot Tags: cuir isteach tnmg,ag casadh,muilleoireacht, gearradh, grooving, monarcha,CNC
