- Produktnamme: TNMG-ynfoegje
- Searjes: TNMG
- Chipbrekers: AM/AR/BF/BM/CM/BR
beskriuwing
Produkt Ynformaasje:
TNMG Insert is trijehoek-foarm mei gat,negative hoeken,oan beide kanten.Foar in breed oanbod fan materialen en ferwurkjen betingsten,om effisjinte ferwurkjen en hege stabiliteit te garandearjenfoar semi-rûchjen en rûchjen.
Sspesifikaasjes:
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 4235 | WD 4335 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | ||||
P Semi Finishing | TNMG160404-AM | 0.60-5.80 | 0.10-0.30 | ● | O | ● | O | O | |||||||
TNMG160408-AM | 1.20-5.80 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
TNMG160412-AM | 1.80-5.80 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
TNMG220408-AM | 1.20-7.70 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
TNMG220412-AM | 1.80-7.70 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
TNMG220416-AM | 2.40-7.70 | 0.40-1.20 | ● | O | ● | O | O | ||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 4235 | WD 4335 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | ||||
P Rough Bewurkje | TNMG160408-AR | 2.00-5.00 | 0.25-0.65 | ● | O | ||||||||||
TNMG220408-AR | 2.50-7.00 | 0.25-0.65 | ● | O | |||||||||||
TNMG220412-AR | 2.50-7.00 | 0.25-0.65 | ● | O | |||||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Finishing | TNMG160404-BF | 0.25-3.10 | 0.05-0.15 | ● | ● | O | O | ||||||||
TNMG160408-BF | 0.50-3.10 | 0.10-0.30 | ● | ● | O | O | |||||||||
TNMG160412-BF | 0.75-3.10 | 0.10-0.30 | ● | ● | O | O | |||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Semi Finishing | TNMG160404-BM | 0.30-4.10 | 0.08-0.25 | O | O | ● | O | O | |||||||
TNMG160408-BM | 0.65-4.10 | 0.15-0.45 | O | O | ● | O | O | ||||||||
TNMG160412-BM | 0.95-4.10 | 0.25-0.65 | O | O | ● | O | O | ||||||||
TNMG220408-BM | 0.65-4.90 | 0.15-0.45 | O | O | ● | O | O | ||||||||
TNMG220412-BM | 0.95-4.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | CVD | |||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Semi Finishing | TNMG160404-CM | 0.40-4.10 | 0.08-0.25 | ● | O | ||
TNMG160408-CM | 0.80-4.10 | 0.15-0.45 | ● | O | |||
TNMG160412-CM | 1.20-4.10 | 0.25-0.65 | ● | O | |||
TNMG220412-CM | 1.20-4.90 | 0.25-0.65 | ● | O | |||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Rough Machining | TNMG160404-BR | 0.30-4.10 | 0.08-0.25 | O | O | ● | O | O | |||||||
TNMG160408-BR | 0.65-4.10 | 0.15-0.45 | O | O | ● | O | O | ||||||||
TNMG160412-BR | 0.95-4.10 | 0.25-0.65 | O | O | ● | O | O | ||||||||
TNMG220408-BR | 0.65-4.90 | 0.15-0.45 | O | O | ● | O | O | ||||||||
TNMG220412-BR | 0.95-4.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach:
De TNMG Insert wurdt benammen brûkt op it mêd fan metaal draaien, milling, cutting en grooving, thread turning, ensfh Oanfraach foar stiel materiaal.
FAQ:
Wat is TNMG-ynfoegje?
TNMG-ynfoegje is ISO-draaiende ynfoegje en meast brûkt yn hast alle CNC-draaibanken. It wurdt brûkt foar tapassingen foar profildraaien en algemiene tapassingen foar draaien fan as. Ynfoegje hat 6 snijkanten.
Wat is it ferskil tusken face milling en ein milling?
Dit binne de meast foarkommende freesoperaasjes, mei ferskate soarten cutters - de einmole en de frontmole. It ferskil tusken einfrees en frontfrees is dat in einmilling sawol de ein as de kanten fan 'e cutter brûkt, wylst face frees wurdt brûkt foar horizontaal snijden.
Hot Tags: tnmg ynfoegje,draaie, frezen, snijden, grooving, fabryk,CNC, TNMG160404, TNMG 1604, TNMG 16, TNMG 22 04 08, TNMG 160408
