- Produktnamme: SNMG Inserts
- Searjes: SNMG
- Chipbrekers: AM/AR/BF/BM/BR/CM/DM
beskriuwing
Produkt Ynformaasje:
Turing ynfoegje SNMG. Dûbelsidich 90 ° fjouwerkante ynserts. 0 graden reliëfhoeke. Solid carbid ark biedt lange tool libben en flugger cutting faasjes as oare substrates, mar binne brossiger en moatte brûkt wurde mei stive ark holding systems.Provides langer ark libben as uncoated grades. Wurdt brûkt op in breed skala oan materialen en applikaasjes.
Spesifikaasjes:
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Semi Finishing | SNMG120404-AM | 1.00-5.00 | 0.12-0.40 | ● | O | ● | O | O | |||||||
SNMG120408-AM | 1.20-5.00 | 0.15-0.55 | ● | O | ● | O | O | ||||||||
SNMG120412-AM | 1.50-5.00 | 0.20-0.55 | ● | O | ● | O | O | ||||||||
SNMG150612-AM | 2.00-7.00 | 0.30-0.65 | ● | O | ● | O | O | ||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Rough Machining | SNMG120408-AR | 2.50-6.00 | 0.25-0.70 | ● | O | ||||||||||
SNMG120412-AR | 2.50-6.00 | 0.30-0.70 | ● | O | |||||||||||
SNMG120416-AR | 2.50-6.00 | 0.40-0.70 | ● | O | |||||||||||
SNMG150612-AR | 2.15-6.40 | 0.25-0.50 | ● | O | |||||||||||
SNMG190612-AR | 2.15-6.40 | 0.25-0.50 | ● | O | |||||||||||
SNMG190616-AR | 2.85-7.60 | 0.30-0.65 | ● | O | |||||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Finishing | SNMG120404-BF | 0.25-3.20 | 0.05-0.15 | ● | ● | O | O | ||||||||
SNMG120408-BF | 0.50-3.20 | 0.10-0.30 | ● | ● | O | O | |||||||||
SNMG120412-BF | 0.75-3.20 | 0.15-0.45 | ● | ● | O | O | |||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Semi Finishing | SNMG120404-BM | 0.30-4.20 | 0.08-0.25 | O | O | ● | O | O | |||||||
SNMG120408-BM | 0.65-4.20 | 0.15-0.45 | O | O | ● | O | O | ||||||||
SNMG120412-BM | 0.95-4.20 | 0.25-0.65 | O | O | ● | O | O | ||||||||
SNMG150608-BM | 0.65-5.20 | 0.15-0.45 | O | O | ● | O | O | ||||||||
SNMG150612-BM | 0.95-5.20 | 0.25-0.65 | O | O | ● | O | O | ||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1528 | WR1330 | ||||
M Rough Machining | SNMG120404-BR | 0.30-4.20 | 0.08-0.25 | O | O | O | ● | ● | O | ||||||
SNMG120408-BR | 0.65-4.20 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
SNMG120412-BR | 0.95-4.20 | 0.23-0.66 | O | O | O | ● | ● | O | |||||||
SNMG150608-BR | 0.65-5.20
| 0.15-0.44 | O | O | O | ● | ● | O | |||||||
SNMG150612-BR | 0.95-5.20 | 0.23-0.66 0.23-0.66 | O | O | O | ● | ● | O | |||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | WD3040 | Ap (mm) | Fn (mm/omw.) | Klasse | |||
CVD | |||||||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Semi Finishing | SNMG120404-CM | 0.40-4.20 | 0.08-0.25 | ● | O | ||
SNMG120408-CM | 0.80-4.20 | 0.15-0.45 | ● | O | |||
SNMG120412-CM | 1.20-4.20 | 0.25-0.65 | ● | O | |||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | ||||||||||||
CVD | PVD | |||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1520 | WR1525 | WR1028 | WR1030 | ||||
S Semi Finishing | SNMG120404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | ● | ● | O | O | ||||||
SNMG120408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
SNMG120412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
SNMG120416-DM | 1.80-3.90 | 0.30-0.90 | O | O | O | ● | ● | O | O | |||||||
SNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
SNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
SNMG150616-DM | 1.80-3.90 | 0.30-0.90 | O | O | O | ● | ● | O | O | |||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach:
Applikaasje foar draaien en frezen fan koalstof- en alloystaal, arkstiel en roestfrij stiel.
FAQ:
Hoe kinne jo de juste draaiende ynfoegje kieze?
Selektearje ynfoegje mjitkunde basearre op selektearre operaasje, bygelyks finishing.
Selektearje de grutste mooglike noas hoeke op it ynfoegje foar sterkte en ekonomy.
Selektearje de ynfoegje grutte ôfhinklik fan de djipte fan cut
Selektearje de grutste mooglike noasradius foar ynfoegje sterkte.
Wat is it ferskil tusken face milling en ein milling?
Dit binne twa fan de meast foarkommende milling operaasjes, elk mei help fan ferskillende soarten cutters - de en mûne en it gesicht mûne. It ferskil tusken einfrees en frontfrees is dat in einmilling sawol de ein as de kanten fan 'e cutter brûkt, wylst face frees wurdt brûkt foar horizontaal snijden.
Hot Tags: snmg ynserts, draaie,frezen, snijden, grooving, fabryk,CNC
