- DNMG Inserts
- Searjes: DNMG
- Chip-Breakers: AM / AR / AS / BF / BM / BR / CM / DM / SM / TM
beskriuwing
Produkt Ynformaasje:
DNMG-ynfoegje is dûbelsidich 55 ° rhombic, klaringshoek 0 °. mei optimalisearre substraat en coating kombinaasje, DNMG hat top prestaasje. Geometry fan ynfoegje kin optimalisearre foar ferwurkjen applikaasje. Grade en mjitkunde jouwe hege betrouberens. Excellent wear detection soarget derfoar dat alle rânen wurde used.With in oanbod fan ferskillende maten, wy meitsje it maklik te selektearjen de ideale turning ynfoegje foar jo plande applikaasjes.
Spesifikaasjes:
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Semi Finishing | DNMG150404-AM | 0.60-5.40 | 0.10-0.30 | ● | O | ● | O | O | |||||||
DNMG150408-AM | 1.20-5.40 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
DNMG150412-AM | 1.80-5.40 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
DNMG150604-AM | 0.60-5.40 | 0.10-0.30 | ● | O | ● | O | O | ||||||||
DNMG150608-AM | 1.20-5.40 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
DNMG150612-AM | 1.80-5.40 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Rough Machining | DNMG150408-AR | 0.80-4.0 | 0.15-0.50 | ● | O | ||||||||||
DNMG150412-AR | 1.20-4.0 | 0.15-0.65 | ● | O | |||||||||||
DNMG150608-AR | 0.80-4.0 | 0.15-0.50 | ● | O | |||||||||||
DNMG150612-AR | 1.20-4.0 | 0.15-0.65 | ● | O | |||||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Finishing | DNMG150404-BF | 0.25-2.90 | 0.05-0.15 | ● | ● | O | O | ||||||||
DNMG150408-BF | 0.50-2.90 | 0.10-0.30 | ● | ● | O | O | |||||||||
DNMG150412-BF | 0.75-2.90 | 0.15-0.45 | ● | ● | O | O | |||||||||
DNMG150604-BF | 0.25-2.90 | 0.05-0.15 | ● | ● | O | O | |||||||||
DNMG150608-BF | 0.50-2.90 | 0.10-0.30 | ● | ● | O | O | |||||||||
DNMG150612-BF | 0.75-2.90 | 0.15-0.45 | ● | ● | O | O | |||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Semi Finishing | DNMG150404-BM | 0.30-3.90 | 0.08-0.25 | O | O | ● | O | O | |||||||
DNMG150408-BM | 0.65-3.90 | 0.15-0.45 | O | O | ● | O | O | ||||||||
DNMG150412-BM | 0.95-3.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
DNMG150604-BM | 0.30-3.90 | 0.08-0.20 | O | O | ● | O | O | ||||||||
DNMG150608-BM | 0.65-3.90 | 0.15-0.45 | O | O | O | O | |||||||||
DNMG150612-BM | 0.95-3.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1528 | WR1330 | ||||
M Rough Machining | DNMG150404-BR | 0.30-3.90 | 0.08-0.25 | O | O | O | ● | ● | O | ||||||
DNMG150408-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
DNMG150412-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
DNMG150604-BR | 0.30-3.90 | 0.08-0.20 | O | O | O | ● | ● | O | |||||||
DNMG150608-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
DNMG150612-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | CVD | |||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Semi Finishing | DNMG150404-CM | 0.40-3.90 | 0.08-0.25 | ● | O | ||
DNMG150408-CM | 0.80-3.90 | 0.15-0.45 | ● | O | |||
DNMG150412-CM | 1.20-3.90 | 0.25-0.65 | ● | O | |||
DNMG150604-CM | 0.40-3.90 | 0.08-0.20 | ● | O | |||
DNMG150608-CM | 0.80-3.90 | 0.15-0.45 | ● | O | |||
DNMG150612-CM | 1.20-3.90 | 0.25-0.65 | ● | O | |||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | ||||||||||||
CVD | PVD | |||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1520 | WR1525 | WR1028 | WR1030 | ||||
S Semi Finishing | DNMG150404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | ● | ● | O | O | ||||||
DNMG150408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
DNMG150412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
DNMG150604-DM | 0.40-3.90 | 0.08-0.20 | O | O | O | ● | ● | O | O | |||||||
DNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
DNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach:
DNMG cutting ark brûkt foar grooving, profilearjen, finishing, en oare Machtigingsformulier applikaasjes.
DNMG is earste kar foar eksterne draaien fan slim workpieces, geskikt foar medium finishing en finishing fanalle soarten stiel.
FAQ:
Hoe kinne jo de juste draaiende ynfoegje kieze?
Selektearje ynfoegje mjitkunde basearre op operaasje, bygelyks finishing.Selektearje de ynfoegje grutte ôfhinklik fan de djipte fan cut.
Selektearje de grutste mooglike noashoek foar sterkte en ekonomy,de grutste mooglike noasradius foar ynfoegje sterkte.
Wat is it ferskil tusken face milling en ein milling?
Dit binne de meast foarkommende freesoperaasjes, mei ferskate soarten cutters - de einmole en de frontmole. It ferskil tusken einfrees en frontfrees is dat in einmilling sawol de ein as de kanten fan 'e cutter brûkt, wylst face frees wurdt brûkt foar horizontaal snijden.
Hot Tags: tnmg ynfoegje,draaie,frezen, snijden, grooving, fabryk,CNC
